Archive | ISO 9001:2015 Internal Auditor Training RSS for this section
October 9, 2012  

IATF 16949:2016 Consultancy

iatf consultancy

Ph.: +91 9313987118; 8810692909; 9599508129

Mail: mkt@mqvindia.com; mqvindia@gmail.com

Call Us now

Call for iatf certification

Send an  Email

images (1)

Ask on WhatsApp

images (1)

Master Group office:

Faridabad, Haryana:

Master Quality Vision

B-387, 2nd Floor, Nehru Ground

Near Punjab National Bank

NIT Faridabad -121001, Haryana, India

Rudrapur, Uttarakhand:

Master Techno Craft

Shop No. 2, Dev Homes Complex , Kiccha Road

Rudrapur 263148, Uttarakhand, India

Haridwar, Uttarakhand:

Master Quality World

C-14, Rao MS Market, Bahadrabad, SIDCUL

Haridwar 249403, Uttarakhand, India

Ph.: +91 9313987118; 8810692909; 9599508129

Mail: mkt@mqvindia.com; mqvindia@gmail.com

We cover below major cities and areas from these locations for consultancy services:

Uttarakhand (Haridwar, SIDCUL, Roorkee, Magloure, Dehradun, Haldwani, Kashipur, Jaspur, Bazpur, Udham Singh Nagar, Rishikesh, Rudrapur, Pantnagar, Kiccha, Sitarganj, Haldwani)

Haryana (Faridabad, Palwal, Ballabhgarh, Gurgaon, Gurugram, Karnal, Panipat, IMT Manesar, Prithla, Sonipat, Kundli, Rewari, Rohtak, Sirsa, Ambala, Panchkla, Hisar, Bahadurgarh, Narnaul, Jind, Sohna, Dharuhera)

Delhi (Samaypur Badali, Kirtinagar, Bawana, Mangolpuri, Narayana, Wazirpur, Okhla, Narela)

Rajasthan (Kota, Jaipur, Udaipur, Bhiwadi, RIICO, Bhilwara, Alwar, Neemrana, Jodhpur)

Himachal Pradesh (Baddi, Solan, Chandigarh, Nalagarh, Derabassi, Parwano, Paonta Sahib, Bilaspur)

Punjab (Jalandhar, Amritsar, Ludhiyana, Patiyala, Pathankot, Hosiyarpur, Derabasi, Rajpura, Zirkpur, Gurdaspur, Mohali)

Uttar Pradesh (Aligarh, Agra, Kanpur, Lucknow, Meerut, Saharanpur, Bulandshahar, Muzaffarnagar)

ISO/IATF 16949:2016
The ISO/IATF 16949:2016 is an ISO technical specification aiming to the development of a quality management system that provides for continual improvement, emphasising defect prevention and the reduction of variation and waste in the supply chain. It is based on the ISO 9001

;2015and the first edition was published in March 2002 as ISO/TS 16949:2002.
It was prepared by the International Automotive Task Force (IATF) and the “Technical Committee” of ISO. It harmonises the country-specific regulations of Quality-Management-Systems. About 30 percent of the more than 100 existing automobile manufacturers affiliate the requirements of the norm but especially the large Asian manufacturers have differentiated, own requirements for the quality management systems of their corporate group and their suppliers.
TS16949 applies to the design/development, production and, when relevant, installation and servicing of automotive-related products. It is based on ISO 9001.
The requirements are intended to be applied throughout the supply chain. For the first time vehicle assembly plants will be encouraged to seek ISO/IATF 16949:2016 certification.
Many suppliers were asked by the car manufacturers (OEMs) to build and certify their quality management system according to the rules and regulations of their own country organisations, such as:
 VDA (Germany)
 AIAG (North America)
 AVSQ (Italy)
 FIEV (France)
 SMMT (UK)
A key requirement of ISO / IATF 16949:2016 is the fulfilment of customer-specific requirements, set up by the automobile manufacturer in addition to the quality management system of their suppliers. This may have decisively contributed to the worldwide recognition of the TS by many manufacturers.
 Section 1-3: Introduction and Preface
 Chapter 4: Quality Management System (general requirements, control of documents and records)
 Chapter 5: Responsibility of the management
 Chapter 6: Management of resources
 Chapter 7: Product realisation
 Section 8: Measurement, Analysis and Improvement

 

September 22, 2012  

Statistical Process Control Services

SPC Training Course

Ph.: +91 9313987118; 8810692909; 9599508129

Mail: mkt@mqvindia.com; mqvindia@gmail.com

Call Us now

Call for iatf certification

Send an  Email

images (1)

Ask on WhatsApp

images (1)

Master Quality World is a group of leading professionals and experts in India providing world class consultation for certifications of your company.

We offer consultancy & training for quality management system certification. We cover almost North India reason and having clients from automotive manufacturing, OEMs clusters, Schools or Education Sector, Hospitals & Medical Assistant, Engineering Companies. We become top & best consultancy service provider due to our approach of working and involvement in process for down the level value addition. Our team is technically qualified and having industrial experience.

Quality Management Certifications Consultancy:

  • ISO 9001:2015 QMS Certification Consultancy Service
  • IATF 16949:2016 Automotive Quality Management System Certification Consultancy
  • ISO 14001:2015 Environment Management System Consultant
  • ISO 18001 OHSAS Occupational Health & Safety Management Trainer for certification
  • HACCP, ISO 22000 Consultancy
  • ISO 27001 Consultancy
  • CE Marking Audit Preparation ECE Certification
  • E Marking & Product Certifications consultancy
  • Value Engineering & Value Analysis Consultant
  • MACE Audit Preparation Consultancy
  • Customer Approval Audits for OEMs
  • Process Improvement Consultant and trainer
  • TPM & TQM consultant and trainer
  • 5S House Keeping on shop floor, office and work area (1S, 2S, 3S, 4S and 5S Levels) implementation consultancy
  • Visual Display Management Consultancy
  • Productivity Improvement  Consultant
  • Factory Improvement  Business Planning & Monitoring
  • KPIs Key performance objectives
  • Quality Improvement Consultant
  • Cost Saving or Cost Reduction Consultancy service
  • Time Saving or Time Management
  • Shop floor improvement and Excellence consultancy and training
  • Manufacturing Excellence consultant

Quality Tools Training Program and course:

  • IATF 16949:2016 Awareness Training
  • ISO 9001:2015 Awareness Training
  • ISO 14001:2015 Awareness Training
  • Potential Failure Mode & Effect Analysis (PFMEA) Training
  • Advance Product Quality Planning (APQP) Training
  • Production Part Approval Process (PPAP) Training
  • Measurement System Analysis (MSA) Training
  • Statistical Process Control (SPC) Training
  • ISO 9001:2015 Internal Auditor Training
  • Training Engineering Students (BE, B Tech, M tech, ITI, Diploma) Training for Industrial Experience
  • Problem Solving Tools (Why analysis, 5W 1h Problem Solving, 8D Problem Analysis, Corrective and Preventive Action CAPA, Root Cause Analysis) Training
  • 5S House Keeping Training
  • Emergency Situation Handling Training
  • Health & Safety Training  Fire Fighting Training
  • Control of Documents and Records  Data Management Training
  • Operator Training & Worker Training
  • Quality Inspector Training
  • Calibration Training

 We are situated in most near to industrial areas having local offices and branches so that we can provide better and services with competitive cost to our customers.

Master Group office:

Faridabad, Haryana:

Master Quality Vision

B-387, 2nd Floor, Nehru Ground

Near Punjab National Bank

NIT Faridabad -121001, Haryana, India

Rudrapur, Uttarakhand:

Master Techno Craft

Shop No. 2, Dev Homes Complex , Kiccha Road

Rudrapur 263148, Uttarakhand, India

Haridwar, Uttarakhand:

Master Quality World

C-14, Rao MS Market, Bahadrabad, SIDCUL

Haridwar 249403, Uttarakhand, India

Ph.: +91 9313987118; 8810692909; 9599508129

Mail: mkt@mqvindia.com; mqvindia@gmail.com

We cover below major cities and areas from these locations for consultancy services:

Uttarakhand (Haridwar, SIDCUL, Roorkee, Magloure, Dehradun, Haldwani, Kashipur, Jaspur, Bazpur, Udham Singh Nagar, Rishikesh, Rudrapur, Pantnagar, Kiccha, Sitarganj, Haldwani)

Haryana (Faridabad, Palwal, Ballabhgarh, Gurgaon, Gurugram, Karnal, Panipat, IMT Manesar, Prithla, Sonipat, Kundli, Rewari, Rohtak, Sirsa, Ambala, Panchkla, Hisar, Bahadurgarh, Narnaul, Jind, Sohna, Dharuhera)

Delhi (Samaypur Badali, Kirtinagar, Bawana, Mangolpuri, Narayana, Wazirpur, Okhla, Narela)

Rajasthan (Kota, Jaipur, Udaipur, Bhiwadi, RIICO, Bhilwara, Alwar, Neemrana, Jodhpur)

Himachal Pradesh (Baddi, Solan, Chandigarh, Nalagarh, Derabassi, Parwano, Paonta Sahib, Bilaspur)

Punjab (Jalandhar, Amritsar, Ludhiyana, Patiyala, Pathankot, Hosiyarpur, Derabasi, Rajpura, Zirkpur, Gurdaspur, Mohali)

Uttar Pradesh (Aligarh, Agra, Kanpur, Lucknow, Meerut, Saharanpur, Bulandshahar, Muzaffarnagar)

 

 

September 22, 2012  

IATF 16949:2016 Consultancy Services

 

IATF 16949 ISO 45001 Consultant in India

Master Quality Vision is a group of leading professionals and experts in India providing world class consultation for certifications of your company.

We offer consultancy & training for quality management system certification. We cover almost North India reason and having clients from automotive manufacturing, OEMs clusters, Schools or Education Sector, Hospitals & Medical Assistant, Engineering Companies. We become top & best consultancy service provider due to our approach of working and involvement in process for down the level value addition. Our team is technically qualified and having industrial experience.

Quality Management Certifications Consultancy:

  • ISO 9001:2015 QMS Certification Consultancy Service
  • IATF 16949:2016 Automotive Quality Management System Certification Consultancy
  • ISO 14001:2015 Environment Management System Consultant
  • ISO 18001 OHSAS ISO 45001 Occupational Health & Safety Management Trainer for certification
  • HACCP, ISO 22000 Consultancy
  • ISO 27001 Consultancy
  • CE Marking Audit Preparation ECE Certification
  • E Marking & Product Certifications consultancy
  • Value Engineering & Value Analysis Consultant
  • MACE Audit Preparation Consultancy
  • Customer Approval Audits for OEMs
  • Process Improvement Consultant and trainer
  • TPM & TQM consultant and trainer
  • 5S House Keeping on shop floor, office and work area (1S, 2S, 3S, 4S and 5S Levels) implementation consultancy
  • Visual Display Management Consultancy
  • Productivity Improvement  Consultant
  • Factory Improvement  Business Planning & Monitoring
  • KPIs Key performance objectives
  • Quality Improvement Consultant
  • Cost Saving or Cost Reduction Consultancy service
  • Time Saving or Time Management
  • Shop floor improvement and Excellence consultancy and training
  • Manufacturing Excellence consultant

Quality Tools Training Program and course:

  • IATF 16949:2016 Awareness Training
  • ISO 9001:2015 Awareness Training
  • ISO 14001:2015 Awareness Training
  • Potential Failure Mode & Effect Analysis (PFMEA) Training
  • Advance Product Quality Planning (APQP) Training
  • Production Part Approval Process (PPAP) Training
  • Measurement System Analysis (MSA) Training
  • Statistical Process Control (SPC) Training
  • ISO 9001:2015 Internal Auditor Training
  • Training Engineering Students (BE, B Tech, M tech, ITI, Diploma) Training for Industrial Experience
  • Problem Solving Tools (Why analysis, 5W 1h Problem Solving, 8D Problem Analysis, Corrective and Preventive Action CAPA, Root Cause Analysis) Training
  • 5S House Keeping Training
  • Emergency Situation Handling Training
  • Health & Safety Training  Fire Fighting Training
  • Control of Documents and Records  Data Management Training
  • Operator Training & Worker Training
  • Quality Inspector Training
  • Calibration Training

We are situated in most near to industrial areas having local offices and branches so that we can provide better and services with competitive cost to our customers.

Call us :

Call us to iso consutancy

WhatsApp:

images (2)

Send Email:

Send-Email-Button-Transparent-PNG

Ph.: +91 9313987118; 8810692909; 9599508129

Mail: mkt@mqvindia.com; mqvindia@gmail.com

We cover below major cities and areas from these locations for consultancy services:

Uttarakhand (Haridwar, SIDCUL, Roorkee, Magloure, Dehradun, Haldwani, Kashipur, Jaspur, Bazpur, Udham Singh Nagar, Rishikesh, Rudrapur, Pantnagar, Kiccha, Sitarganj, Haldwani)

Hayana (Faridabad, Palwal, Ballabhgarh, Gurgaon, Gurugram, Karnal, Panipat, IMT Manesar, Prithla, Sonipat, Kundli, Rewari, Rohtak, Sirsa, Ambala, Panchkla, Hisar, Bahadurgarh, Narnaul, Jind, Sohna, Dharuhera)

Delhi (Samaypur Badali, Kirtinagar, Bawana, Mangolpuri, Narayana, Wazirpur, Okhla, Narela)

Rajasthan (Kota, Jaipur, Udaipur, Bhiwadi, RIICO, Bhilwara, Alwar, Neemrana, Jodhpur)

Himachal Pradesh (Baddi, Solan, Chandigarh, Nalagarh, Derabassi, Parwano, Paonta Sahib, Bilaspur)

Punjab (Jalandhar, Amritsar, Ludhiyana, Patiyala, Pathankot, Hosiyarpur, Derabasi, Rajpura, Zirkpur, Gurdaspur, Mohali)

Uttar Pradesh (Aligarh, Agra, Kanpur, Lucknow, Meerut, Saharanpur, Bulandshahar, Muzaffarnagar)

 

 

 

 

September 22, 2012  

IATF 16949:2016 Consultancy Services

iatf 16949 certification consultant and training

Ph.: +91 9313987118; 8810692909; 9599508129

Mail: mkt@mqvindia.com; mqvindia@gmail.com

Call Us now

Call for iatf certification

Send an  Email

images (1)

Ask on WhatsApp

images (1)

Master Quality Vision is a group of leading professionals and experts in India providing world class consultation for certifications of your company.

We offer consultancy & training for quality management system certification. We cover almost North India reason and having clients from automotive manufacturing, OEMs clusters, Schools or Education Sector, Hospitals & Medical Assistant, Engineering Companies. We become top & best consultancy service provider due to our approach of working and involvement in process for down the level value addition. Our team is technically qualified and having industrial experience.

Quality Management Certifications Consultancy:

  • ISO 9001:2015 QMS Certification Consultancy Service
  • IATF 16949:2016 Automotive Quality Management System Certification Consultancy
  • ISO 14001:2015 Environment Management System Consultant
  • ISO 18001 OHSAS Occupational Health & Safety Management Trainer for certification
  • HACCP, ISO 22000 Consultancy
  • ISO 27001 Consultancy
  • CE Marking Audit Preparation ECE Certification
  • E Marking & Product Certifications consultancy
  • Value Engineering & Value Analysis Consultant
  • MACE Audit Preparation Consultancy
  • Customer Approval Audits for OEMs
  • Process Improvement Consultant and trainer
  • TPM & TQM consultant and trainer
  • 5S House Keeping on shop floor, office and work area (1S, 2S, 3S, 4S and 5S Levels) implementation consultancy
  • Visual Display Management Consultancy
  • Productivity Improvement  Consultant
  • Factory Improvement  Business Planning & Monitoring
  • KPIs Key performance objectives
  • Quality Improvement Consultant
  • Cost Saving or Cost Reduction Consultancy service
  • Time Saving or Time Management
  • Shop floor improvement and Excellence consultancy and training
  • Manufacturing Excellence consultant

Quality Tools Training Program and course:

  • IATF 16949:2016 Awareness Training
  • ISO 9001:2015 Awareness Training
  • ISO 14001:2015 Awareness Training
  • Potential Failure Mode & Effect Analysis (PFMEA) Training
  • Advance Product Quality Planning (APQP) Training
  • Production Part Approval Process (PPAP) Training
  • Measurement System Analysis (MSA) Training
  • Statistical Process Control (SPC) Training
  • ISO 9001:2015 Internal Auditor Training
  • Training Engineering Students (BE, B Tech, M tech, ITI, Diploma) Training for Industrial Experience
  • Problem Solving Tools (Why analysis, 5W 1h Problem Solving, 8D Problem Analysis, Corrective and Preventive Action CAPA, Root Cause Analysis) Training
  • 5S House Keeping Training
  • Emergency Situation Handling Training
  • Health & Safety Training  Fire Fighting Training
  • Control of Documents and Records  Data Management Training
  • Operator Training & Worker Training
  • Quality Inspector Training
  • Calibration Training

 We are situated in most near to industrial areas having local offices and branches so that we can provide better and services with competitive cost to our customers.

Master Group office:

Faridabad, Haryana:

Master Quality Vision

B-387, 2nd Floor, Nehru Ground

Near Punjab National Bank

NIT Faridabad -121001, Haryana, India

Rudrapur, Uttarakhand:

Master Techno Craft

Shop No. 2, Dev Homes Complex , Kiccha Road

Rudrapur 263148, Uttarakhand, India

Haridwar, Uttarakhand:

Master Quality World

C-14, Rao MS Market, Bahadrabad, SIDCUL

Haridwar 249403, Uttarakhand, India

Ph.: +91 9313987118; 8810692909; 9599508129

Mail: mkt@mqvindia.com; mqvindia@gmail.com 

      

We cover below major cities and areas from these locations for consultancy services:

Uttarakhand (Haridwar, SIDCUL, Roorkee, Magloure, Dehradun, Haldwani, Kashipur, Jaspur, Bazpur, Udham Singh Nagar, Rishikesh, Rudrapur, Pantnagar, Kiccha, Sitarganj, Haldwani)

Haryana (Faridabad, Palwal, Ballabhgarh, Gurgaon, Gurugram, Karnal, Panipat, IMT Manesar, Prithla, Sonipat, Kundli, Rewari, Rohtak, Sirsa, Ambala, Panchkla, Hisar, Bahadurgarh, Narnaul, Jind, Sohna, Dharuhera)

Delhi (Samaypur Badali, Kirtinagar, Bawana, Mangolpuri, Narayana, Wazirpur, Okhla, Narela)

Rajasthan (Kota, Jaipur, Udaipur, Bhiwadi, RIICO, Bhilwara, Alwar, Neemrana, Jodhpur)

Himachal Pradesh (Baddi, Solan, Chandigarh, Nalagarh, Derabassi, Parwano, Paonta Sahib, Bilaspur)

Punjab (Jalandhar, Amritsar, Ludhiyana, Patiyala, Pathankot, Hosiyarpur, Derabasi, Rajpura, Zirkpur, Gurdaspur, Mohali)

Uttar Pradesh (Aligarh, Agra, Kanpur, Lucknow, Meerut, Saharanpur, Bulandshahar, Muzaffarnagar)

IATF 16949:2016
The IATF 16949:2016 is an ISO technical specification aiming to the development of a quality management system that provides for continual improvement, emphasising defect prevention and the reduction of variation and waste in the supply chain. It is based on the ISO 9001:2015 and the first edition was published in March 2002 as IATF 16949:2016
It was prepared by the International Automotive Task Force (IATF) and the “Technical Committee” of ISO. It harmonises the country-specific regulations of Quality-Management-Systems. About 30 percent of the more than 100 existing automobile manufacturers affiliate the requirements of the norm but especially the large Asian manufacturers have differentiated, own requirements for the quality management systems of their corporate group and their suppliers.
TS16949 applies to the design/development, production and, when relevant, installation and servicing of automotive-related products. It is based on ISO 9001.
The requirements are intended to be applied throughout the supply chain. For the first time vehicle assembly plants will be encouraged to seek IATF 16949:2016 certification.
Many suppliers were asked by the car manufacturers (OEMs) to build and certify their quality management system according to the rules and regulations of their own country organisations, such as:
 VDA (Germany)
 AIAG (North America)
 AVSQ (Italy)
 FIEV (France)
 SMMT (UK)

But due to this regulation a supplier needed to provide two different certificates for Daimler and Chrysler (VDA 6.1 for Germany and QS 9000 America), even though the supplier delivered only to a single company. These complexities accelerated the need for harmonisation.
Content of the specification
Aim of the standard is to improve the system and process quality to increase customer satisfaction, to identify problems and risks in production process and supply chain, to eliminate its causes and to examine taken corrections and preventive measures for their effectiveness. The focus lies not on the discovery, but on the avoidance of errors. The eight main chapters of the standards are:
 Section 1-3: Introduction and Preface
 Chapter 4: Quality Management System (general requirements, control of documents and records)
 Chapter 5: Responsibility of the management
 Chapter 6: Management of resources
 Chapter 7: Product realisation
 Section 8: Measurement, Analysis and Improvement
The process-oriented approach to business processes that is addressed in the ISO 9001:2008 stands at the forefront of the standard. It looks at the business processes in a process environment in which there are interactions and interfaces that need to be recognised, mapped and controlled by the quality management system. Additionally the gateways to the exterior (to sub-suppliers, customers and to remote locations) are defined. The Standard distinguishes between customer-oriented processes, supporting processes and management processes. This process-oriented approach is meant to improve the understanding of the whole process. Not an isolated process, but the entity of all interacting business processes affect the quality performance of a firm.
A key requirement of ISO / TS 16949:2009 is the fulfilment of customer-specific requirements, set up by the automobile manufacturer in addition to the quality management system of their suppliers. This may have decisively contributed to the worldwide recognition of the TS by many manufacturers.

« Older Posts
Newer Posts »